Designed for extending the range of 2.4GHz wireless radio devices, the booster amplifier is particularly effective when used with Direct Sequence or Frequency Hopping Spread
Spectrum radio modems . The unit provides the transmit power gain as well as receive signal gain.
Proprietary in-house MMIC design allows sensing of input power level and protects itself against over power or reverse power operating conditions.
Strengthen radio signal to Increase the effective range and coverage area for Wi-Fi communication
Save wiring costs, easily build a wireless infrastructure for home or business use
Make broadband wireless application in possible coverage
No software required, easy to install
Operating frequency: 2400 ~ 2483.5MHz
Operating mode: TDD
Signal standard: IEEE 802.11b/g/n
Minimum input power: 3dBm
Maximum input power: 20dBm
Standard output power: 27dBm(500mw) | @EVM<5%
Maximum output power: 33.6dBm(2.3W)
Uplink gain: 16dB
Downlink gain: 12dB
Noise figure: <2.5dB
Operating temperature: -10? to +45?
Router Interface: SMA Female
Antenna Interface: RP-SMA Male
DC supply 9V
This product was added to our catalog on Tuesday 11 October, 2011.